JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD
JIANGSU LIANZHONG METAL PRODUCTS (GROUP) CO., LTD
Add to Cart
304 Coil Grand Manufacturer Stainless Steel Coil Cold Rolled Mill BA Finish 1.5mm Thick
| |
|
NORMAL SIZE
| Thickness (mm) | Width(mm) | |||||
| 600-999 | 1000 | 1200 | 1219 | 1250 | 1500 | |
| 0.12-0.19 | √ | √ | √ | √ | √ | |
| 0.20-0.29 | √ | √ | √ | √ | √ | |
| 0.30-0.39 | √ | √ | √ | √ | √ | |
| 0.40-0.49 | √ | √ | √ | √ | √ | |
| 0.50-0.59 | √ | √ | √ | √ | √ | |
| 0.60-0.69 | √ | √ | √ | √ | √ | |
| 0.70-0.79 | √ | √ | √ | √ | √ | |
| 0.80-0.89 | √ | √ | √ | √ | √ | |
| 0.90-0.99 | √ | √ | √ | √ | √ | |
| 1.00-1.20 | √ | √ | √ | √ | √ | |
| Product Name | Stainless Steel Coil / Strip / Sheets |
| Standard | AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
| Material | 201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321, 310S, 309S, 410, 410S,420, 430, 431, 440A, 904L, 2205, 2507, ect. |
| Thickness(mm) | Cold rolled:0.25mm-3.0mmHot rolled: 3.0mm-180mmAs Your Request |
| Width(mm) | Hot rolled regular width:1500,1800,2000, As Your RequestCold rolled regular width:1000,1219,1250,1500,As Your Request |
| Technique | Hot rolled / cold rolled |
| Length | 1-12m or as Your Request |
| Surface | 2B,BA(bright annealed) NO.1 NO.2 NO.3 NO.4,2D, 4K, 6K, 8K HL(Hair Line), SB, Embossed,as your request |
| Application | Furniture, doors, kitchen appliances, structural material, commercial use, structural use ,roofing,corrugated roofing, household appliance, industry, auto parts,cold roomse, etc. |
| Packing | Standard Sea-worthy Packing / As Your Request |
| International certification method: | ISO SGS BV CE |
| Stainless Steel Chemical Composition Chart, Percentage (%) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Stainless Steel | C, ≤ | Mn, ≤ | P, ≤ | S, ≤ | Si, ≤ | Cr | Ni | Mo | N, ≤ | Other Elements, ≤ |
| 304 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | – | – | – |
| 304L | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-12.0 | – | – | – |
| 316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – | – |
| 316L | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – | – |
| 321 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | 0.10 | ≥ Ti 5×(C+N), ≤ 0.70 |
| 201 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1.00 | 16.0-18.0 | 3.5-5.5 | – | 0.25 | – |
| 202 | 0.15 | 7.50-10.00 | 0.06 | 0.03 | 1.00 | 17.0-19.0 | 4.0-6.0 | – | 0.25 | – |
| 205 | 0.12-0.25 | 14.0-15.5 | 0.06 | 0.03 | 1.00 | 16.5-18.0 | 1.0-1.7 | – | 0.32-0.40 | – |
| 301 | 0.15 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 6.0-8.0 | – | 0.10 | – |
| 301L | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 6.0-8.0 | – | 0.20 | – |
| 301LN | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 6.0-8.0 | – | 0.07-0.20 | – |
| 302 | 0.15 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 8.0-10.0 | – | 0.10 | – |
| 302B | 0.15 | 2.00 | 0.045 | 0.03 | 2.00-3.00 | 17.0-19.0 | 8.0-10.0 | – | 0.10 | – |
| 303 | 0.15 | 2.00 | 0.2 | ≥0.15 | 1.00 | 17.0-19.0 | 8.0-10.0 | – | – | – |
| 303Se | 0.15 | 2.00 | 0.2 | 0.06 | 1.00 | 17.0-19.0 | 8.0-10.0 | – | – | Se 0.15 |
| 304H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 8.0-10.5 | – | – | – |
| 304N | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | – | 0.10-0.16 | – |
| 304LN | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | – | 0.10-0.16 | – |
| 305 | 0.12 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 11.0-13.0 | – | – | – |
| 308 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 19.0-21.0 | 10.0-12.0 | – | – | – |
| 309 | 0.2 | 2.00 | 0.045 | 0.03 | 1.00 | 22.0-24.0 | 12.0-15.0 | – | – | – |
| 309S | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 22.0-24.0 | 12.0-15.0 | – | – | – |
| 309H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 22.0-24.0 | 12.0-15.0 | – | – | – |
| 309Cb | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 22.0-24.0 | 12.0-16.0 | – | – | ≥ Cb 10 x C, ≤1.10 |
| 309HCb | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 22.0-24.0 | 12.0-16.0 | – | – | ≥ Cb 10 x C, ≤1.10 |
| 310 | 0.25 | 2.00 | 0.045 | 0.03 | 1.5 | 24.0-26.0 | 19.0-22.0 | – | – | – |
| 310S | 0.08 | 2.00 | 0.045 | 0.03 | 1.5 | 24.0-26.0 | 19.0-22.0 | – | – | – |
| 310H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 24.0-26.0 | 19.0-22.0 | – | – | – |
| 310Cb | 0.08 | 2.00 | 0.045 | 0.03 | 1.5 | 24.0-26.0 | 19.0-22.0 | – | – | ≥ Cb 10 x C, ≤ 1.10 |
| 310 MoLN | 0.02 | 2.00 | 0.03 | 0.01 | 0.5 | 24.0-26.0 | 20.5-23.5 | 1.60-2.60 | 0.09-0.15 | – |
| 314 | 0.25 | 2.00 | 0.045 | 0.03 | 1.50-3.00 | 23.0-26.0 | 19.0-22.0 | – | – | – |
| 316H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – | – |
| 316Ti | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.1 | ≥ Ti 5 × (C + N), ≤0.70 |
| 316Cb | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.1 | ≥ Cb 10 × C, ≤ 1.10 |
| 316N | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.10-0.16 | – |
| 316LN | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-13.0 | 2.00-3.00 | 0.10-0.16 | – |
| 317 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | 0.1 | – |
| 317L | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | 0.1 | – |
| 317LM | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 13.5-17.5 | 4.0-5.0 | 0.2 | – |
| 317LMN | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-20.0 | 13.5-17.5 | 4.0-5.0 | 0.10-0.20 | – |
| 317LN | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | 0.10-0.22 | – |
| 321 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | 0.1 | ≥ Ti 5 × (C + N), ≤ 0.70 |
| 321H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 9.0-12.0 | – | – | ≥ Ti 4 × (C + N), ≤ 0.70 |
| 334 | 0.08 | 1.00 | 0.03 | 0.015 | 1.00 | 18.0-20.0 | 19.0-21.0 | – | – | Al 0.15-0.60, Ti 0.15-0.60 |
| 347 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | – | ≥ Cb 10 × C, ≤ 1.00 |
| 347H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 9.0-13.0 | – | – | ≥ Cb 8 × C, ≤ 1.00 |
| 347LN | 0.005-0.020 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-13.0 | – | 0.06-0.10 | Cb 0.20-0.50, 15 × C ≥ |
| 348 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | – | Cb 10×C-1.10, Ta 0.10, Co 0.20 |
| 348H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 9.0-13.0 | – | – | (Cb + Ta) 8×C ≥ , 1.00 ≤, Ta 0.10, Co 0.20 |
| 2205 | 0.03 | 2.00 | 0.03 | 0.02 | 1.00 | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 | – |
| 2304 | 0.03 | 2.5 | 0.04 | 0.03 | 1.00 | 21.5-24.5 | 3.0-5.5 | 0.05-0.60 | 0.05-0.60 | – |
| 255 | 0.04 | 1.5 | 0.04 | 0.03 | 1.00 | 24.0-27.0 | 4.5-6.5 | 2.9-3.9 | 0.10-0.25 | Cu 1.50-2.50 |
| 2507 | 0.03 | 1.2 | 0.035 | 0.02 | 0.8 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | Cu ≤0.50 |
| 329 | 0.08 | 1.00 | 0.04 | 0.03 | 0.75 | 23.0-28.0 | 2.0-5.00 | 1.00-2.00 | – | – |
| 403 | 0.15 | 1.00 | 0.04 | 0.03 | 0.5 | 11.5-13.0 | – | – | – | – |
| 405 | 0.08 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-14.5 | ≤0.5 | – | – | Al 0.10-0.30 |
| 410 | 0.08-0.15 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | – | – | – | – |
| 410S | 0.08 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | ≤0.6 | – | – | – |
| 414 | 0.15 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | 1.25-2.50 | – | – | – |
| 416 | 0.15 | 1.25 | 0.06 | ≥0.15 | 1.00 | 12.0-14.0 | – | – | – | – |
| 416Se | 0.15 | 1.25 | 0.06 | ≥0.06 | 1.00 | 12.0-14.0 | – | – | – | Se 0.15 |
| 420 | 0.15, ≥ | 1.00 | 0.04 | 0.03 | 1.00 | 12.0-14.0 | – | – | – | – |
| 420F | 0.30-0.40 | 1.25 | 0.06 | ≥0.15 | 1.00 | 12.0-14.0 | ≤0.5 | – | – | Cu 0.60 |
| 420FSe | 0.20-0.40 | 1.25 | 0.06 | 0.15 | 1.00 | 12.0-14.0 | ≤0.5 | – | – | Se 0.15; Cu 0.60 |
| 422 | 0.20-0.25 | 0.50-1.00 | 0.025 | 0.025 | 0.5 | 11.0-12.5 | 0.50-1.00 | 0.90-1.25 | – | V (0.20-0.30), W (0.90-1.25) |
| 429 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 14.0-16.0 | – | – | – | – |
| 430 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | – | – | – |
| 430F | 0.12 | 1.25 | 0.06 | ≥0.15 | 1.00 | 16.0-18.0 | – | – | – | – |
| 430FSe | 0.12 | 1.25 | 0.06 | 0.06 | 1.00 | 16.0-18.0 | – | – | – | Se 0.15 |
| 439 | 0.03 | 1.00 | 0.04 | 0.03 | 1.00 | 17.0-19.0 | ≤0.5 | – | 0.03 | ≥ Ti [0.20+4(C+N)], ≤ 1.10; Al 0.15 |
| 431 | 0.2 | 1.00 | 0.04 | 0.03 | 1.00 | 15.0-17.0 | 1.25-2.50 | – | – | – |
| 434 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | 0.75-1.25 | – | |
| 436 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | 0.75-1.25 | – | ≥ Cb 5×C, ≤ 0.80 |
| 440A | 0.60-0.75 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | ≤0.75 | – | – |
| 440B | 0.75-0.95 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | ≤0.75 | – | – |
| 440C | 0.95-1.20 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | ≤0.75 | – | – |
| 440F | 0.95-1.20 | 1.25 | 0.06 | 0.15 | 1.00 | 16.0-18.0 | ≤0.5 | – | – | Cu ≤0.60 |
| 440FSe | 0.95-1.20 | 1.25 | 0.06 | 0.06 | 1.00 | 16.0-18.0 | ≤0.5 | – | – | Se ≤0.15; Cu ≤0.60 |
| 442 | 0.2 | 1.00 | 0.04 | 0.04 | 1.00 | 18.0-23.0 | ≤0.6 | – | – | |
| 444 | 0.025 | 1.00 | 0.04 | 0.03 | 1.00 | 17.5-19.5 | ≤1.00 | 1.75-2.50 | 0.035 | Ti+Cb 0.20+4 × (C+N)-0.80 |
| 446 | 0.2 | 1.5 | 0.04 | 0.03 | 1.00 | 23.0-27.0 | ≤0.75 | – | 0.25 | – |
| 800 | 0.1 | 1.5 | 0.045 | 0.015 | 1.00 | 19.0-23.0 | 30.0-35.0 | – | – | Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60 |
| 800H | 0.05-0.10 | 1.5 | 0.045 | 0.015 | 1.00 | 19.0-23.0 | 30.0-35.0 | – | – | Cu 0.75; ≥ FeH 39.5; Al 0.15-0.60 |
| 904L | 0.02 | 2.00 | 0.045 | 0.035 | 1.00 | 19.0-23.0 | 23.0-28.0 | 4.00-5.00 | 0.1 | Cu 1.00-2.00 |
| Alloy 20 | 0.07 | 2.00 | 0.045 | 0.035 | 1.00 | 19.0-21.0 | 32.0-38.0 | 2.00-3.00 | – | Cu 3.0-4.0; ≥ Nb 8 × C; ≤1.00 |
| XM-1 | 0.08 | 5.0-6.5 | 0.04 | 0.18-0.35 | 1.00 | 16.00-18.0 | 5.0-6.5 | – | – | Cu 1.75-2.25 |
| XM-2 | 0.15 | 2.00 | 0.05 | 0.11-0.16 | 1.00 | 17.0-19.0 | 8.0-10.0 | 0.40-0.60 | – | Al 0.60-1.00 |
| XM-5 | 0.15 | 2.5-4.5 | 0.2 | ≥0.25 | 1.00 | 17.0-19.0 | 7.0-10.0 | – | – | – |
| XM-6 | 0.15 | 1.50-2.50 | 0.06 | ≥0.15 | 1.00 | 12.0-14.0 | – | – | – | – |
| XM-10 | 0.08 | 8.0-10.0 | 0.045 | 0.03 | 1.00 | 19.0-21.5 | 5.5-7.5 | – | 0.15-0.40 | – |
| XM-11 | 0.04 | 8.0-10.0 | 0.045 | 0.03 | 1.00 | 19.0-21.5 | 5.5-7.5 | – | 0.15-0.40 | – |
| XM-15 | 0.08 | 2.00 | 0.03 | 0.03 | 1.50-2.50 | 17.0-19.0 | 17.5-18.5 | – | – | – |
| XM-17 | 0.08 | 7.50-9.00 | 0.045 | 0.03 | 0.75 | 17.5-22.0 | 5.0-7.0 | 2.00-3.00 | 0.25-0.50 | – |
| XM-18 | 0.03 | 7.50-9.00 | 0.045 | 0.03 | 0.75 | 17.5-22.0 | 5.0-7.0 | 2.00-3.00 | 0.25-0.50 | – |
| XM-19 | 0.06 | 4.0-6.0 | 0.045 | 0.03 | 1.00 | 20.5-23.5 | 11.5-13.5 | 1.50-3.00 | 0.20-0.40 | Cb 0.10-0.30, V 0.10-0.30 |
| XM-21 | 0.08 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 8.0-10.5 | – | 0.16-0.30 | – |
| XM-27 | 0.01 | 0.4 | 0.02 | 0.02 | 0.4 | 25.0-27.5 | ≤0.5 | 0.75-1.50 | 0.015 | Cu 0.20; Cb 0.05-0.20; (Ni + Cu) 0.50 |
| XM-33 | 0.06 | 0.75 | 0.04 | 0.02 | 0.75 | 25.0-27.0 | ≤0.5 | 0.75-1.50 | 0.04 | Cu 0.20; Ti 0.20-1.00; ≥ Ti 7(C+N) |
| XM-34 | 0.08 | 2.5 | 0.04 | ≥0.15 | 1.00 | 17.5-19.5 | – | 1.50-2.50 | – | – |
| PH 13-8Mo | 0.05 | 0.2 | 0.01 | 0.008 | 0.1 | 12.25-13.25 | 7.5-8.5 | – | – | – |
| 15-5 PH | 0.07 | 1 | 0.04 | 0.03 | 1 | 14.0-15.5 | 3.5-5.5 | – | – | 2.5-4.5 Cu; 0.15-0.45 Nb |
| 17-4 PH | 0.07 | 1 | 0.04 | 0.03 | 1 | 15.5-17.5 | 3.0-5.0 | – | – | 3.0-5.0 Cu; 0.15-0.45 Nb |
| 17-7 PH | 0.09 | 1 | 0.04 | 0.04 | 1 | 16.0-18.0 | 6.5-7.75 | – | – | 0.75-1.5 Al |
CUSTOMER:
FEEDBACK:
FAQ:
How about the delivery time?
Within 15-30days after receiving the deposit or L/C at sight. Of course, the detail will be confirmed by the quantity and the different products.
How to order?
Please send us your purchase order by email. Or you can ask us to send you a proforma invoice for your order. We need to know the following information for your order.
What is shipment terms?
1. Container ship 2. bulk ship 3. Train
Do you have English Mill Test Certificates?
Yes,that is what we give gurantee to our clients
Do you accept the third party inspection?
Yes,absolutely we accept.